Beverage (CO2) Aluminum Cylinder

Part No.

Diameter

Length  

Empty Weight

CO2 Capacity

Nitrogen Capacity

Water Capacity

Standard Thread Size*

(in / mm)

(in / mm)

(lbs / kgs)

(lbs / kgs)

(cu ft / liters)

(cu in / lbs / liters)

B35

8.00 / 203.0

37.8 / 960

35.2 / 16.0

35 / 15.9

100.9 / 2527

1426 / 51.5 / 23.4

1.125-12UNF-2B / 25E

B22

8.00 / 203.0

25.1 / 638

24.5 / 11.1

22 / 10.0

63.5 / 1798

901 / 32.5 / 14.7

1.125-12UNF-2B / 25E

B20

8.00 / 203.0

23.2 / 589

23.1 / 10.5

20 / 9.1

57.6 / 1631

814 / 29.4 / 13.3

1.125-12UNF-2B / 25E

B15

6.89 / 175.0

23.1 / 587

16.2 / 7.3

15 / 6.8

43.3 / 1226

612 / 22.1 / 10.0

1.125-12UNF-2B / 25E

B10

6.89 / 175.0

16.5 / 419

12.3 / 5.6

10 / 4.5

29.0 / 821

407 / 14.7 / 6.7

1.125-12UNF-2B / 25E

B5

5.25 / 133.4

14.2 / 361

6.3 / 2.9

5 / 2.3

14.5 / 411

203 / 7.4 / 3.4

1.125-12UNF-2B / 25E

B2.5

4.38 / 111.3

10.3 / 262

3.2 / 1.5

2.5 / 1.1

7.2 / 204

102 / 3.7 / 1.7

.750-16UNF-2B

* Other thread sizes (i.e. 3/4-14 NGT, etc.) available upon request.

SERVICE PRESSURE: 1800 psi / 124 bar

MATERIAL: Every cylinder is produced from high strength aluminum alloy 6061-T6.

MARKINGS: Cylinders are stamped with required U.S. Department of Transportation (DOT) and Transport Canada (TC) Markings.

FINISH: Brushed body with natural unpainted dome is standard. Full body powder coating is available.

VALVES: CGA designation valves installed upon request.

ACCESSORIES: The B10, B15, B20 & B35 are available with either a carrying handle or collar and valve protective cap.

REGULATION & INSPECTION: All seamless aluminum alloy compressed gas cylinders are manufactured in accordance with U.S. DOT 3AL and TC 3ALM requirements. Every cylinder is inspected and tested by a DOT and TC authorized independent inspection agency.

Send us a Message